Our Bearing Selector
Click here to find your bearing伟德1946客户端下载
The BowMet range has been billed as the biggest advance in plain bearings in more than 70 years by the industry press; and quite rightly so. This new range of heavy duty bearings offers a higher load capacity than any other proprietary plain bearing. Its heat, speed and corrosion capabilities combine to offer a heavy duty bearing that can stand up to even the harshest of conditions.
These heavy duty bearings have been developed using ToughMet® material by Materion in the USA. The ToughMet material that BowMet is made from was used on the Mars Rover in 2011, so that should give you some idea of just how ‘tough’ ToughMet is!
With a static load of 820 N/mm2and an impressive PV factor of 9.6 these heavy duty bearings are ideally suited to a wide range of harsh industrial applications including:
The ToughMet material resists saltwater corrosion, hydrogen embrittlement and chloride stress-corrosion cracking better than most copper alloys. Indeed, in some sulphide environments, the corrosion rate is comparable to stainless steel and nickel alloys.
The capacity to deliver increased reliability, reduced downtime, lower maintenance costs and ultimately fewer warranty claims mean that BowMet range of heavy duty bearings really is nothing short of a revolution in bearing design and capability.
For more information on ToughMet® and Materionclick here
|Structure||Toughmet ® spinodal bronze with optional lubrication holes/indentations|
|Max PV – Dry (N/mm² x m/s)||0.6|
|Max PV – Oiled (N/mm² x m/s)||9.6|
|Max Static load (N/mm²)||820|
|Max Dynamic load (N/mm²)||340|
|Max Sliding speed – With Oil (m/s)||10|
|Operating temperature (°C)||-250 to 300|
|Thermal Conductivity (W/mk)||38|
|Coefficient of thermal expansion||16.4 x 10-6/°C|
|Coefficient of friction – Dry||0.25|
|Coefficient of friction – With Oil||0.04|
|Recommended shaft finish (Ra)||0.4 max (N5)|
|Recommended shaft hardness (HRC)||60|
|Hardness (HRC)||30 min|
|Ultimate Tensile strength (N/mm²)||860|
|Yield strength (N/mm²)||725|
|Elastic modulus (N/mm²)||144000|